| How to make a multiple songs
overlap one from another?
FlexiMusic Wave Editor will
allows you to overlap songs, So that the next song will overlap the end of
the current song by the selected portion. To combine four or more songs one
after another to create your finished songs.
Let's assume you would
like to combine two sound files drum.wav and piano.wav
1. Run the FlexiMusic Wave
Editor.
2. Open both the files in
FlexiMusic Wave Editor. Use the top tabs to switch between the files.
3. Check the format for
both files, make it same if they are different using the format menu (Menu >
File > Format). (Since you are going to write to CD required format is
44100Hz, 16bits, Stereo)
4. Switch to "piano.wav"
window, Use Select All command to select the whole file, and copy the
selected part using Copy Selected (Menu > Edit > Copy Selected).
5. With the piano sound in
the Clipboard, switch to other window (drum.wav), Place the cursor on the
position you want the joining to start (i.e. at the end of the drum file)
and click on the waveform for making one point selection, then use the
command Paste-Insert (Menu > Edit > Paste-Insert).
6. To create a smooth
transition between the two songs use "Lap [Over Lap/Transition]" command,
fading one section out and the next one in, while overlapping them.
- Select a range
covering 5 seconds at the end of drum.wav file and another 5 seconds at the
start of piano.wav then apply the command Lap [Over Lap/Transition].
- This will open a Lap
(Cut and Overlap) dialogue box. In that you have to choose the Current
Selection type as "Current Selection is both (cut in middle)" and
Transition Style as "Smooth Transition (fade in and fade out)".
7. You can press the
Play button to hear the result.
8. To save your combined
file, it is safer to save the file using the "Save As" command giving
the file a new name.
|
