| How to add a background
music to voice ? In
FlexiMusic Wave Editor use "Paste-Mix" command to do this. This command enables you to take two
different sound files and mix them into one sound file. The result is a
single sound file that plays both of the original sounds together.
To mix two files
together:
Let's assume you would like
to mix two sound files voice.wav and
piano.wav.
1. Open both the files in
FlexiMusic Wave Editor. Use the top tabs to switch between the files.
2. Check the format for
both files, make it same if they are different using the format menu (Menu >
File > Format), if you have originally recorded with the same format then no
need to change the format.
3. Adjust the volume of
each.
4. Switch to "piano.wav"
window, If you need a part of a sound do a selection with mouse or use Select All
command to select the whole file, copy the selected part using Copy Selected
(Menu > Edit > Copy Selected). As it copies you note down the duration shown.
5. With the piano sound in
the Clipboard, switch to other file (voice.wav), Place the cursor on the
position you want the mixing to start and click on the waveform for making one point selection, then
use the command Paste-Mix (Menu > Edit > Paste-Mix).
6. After mixing you test
play, If the volume is high or low for one you can undo and adjust the
volume and mix again.
7. To save your mixed
file, it is safer to save the file using the "Save As" command giving
the file a new name. |
