How to loop a 2.5 minutes
music file as a background music (mix) for one hour of recorded voice file?
First create a looping sound separately and then use "Paste-Mix" to
mix both.1. Run the
FlexiMusic Wave Editor.
2. Open the one hour recorded
voice file.
3. Then open the 2.5 minutes music file. Both will be side by side, You can
switch between files using the top tab.
4. Check the format for both
files, make it same if they are different using the format menu, if you have
originally recorded with the same format then no need to change the format.
A. Create a
Looping Sound
5. You need to loop the
2.5 Minutes music to make it 1 hour. Calculate the number of loops by using the formula
Total
Duration / Looping part duration ( 60/2.5=24).
6. Use the File > New command to create a new file. and make the
format same as the other files.
7. Switch to music file, Select the part of music you want to loop, If the
total file is 2.5 minutes use Select All command.
8. Switch to the new file. Making one point selection use "Paste-Multi-Insert" command (Edit > Paste >
Multi-Insert), and enter the 24 times (calculated using the formula). This
will make the new file of 2.5 minutes music audio looping for 24 times
making it as 1 hour.
B. To Mix files
together
9. Now Select the one hour looping song and use Copy Selected (Menu >
Edit > Copy Selected)
10. With the music sound
in the Clipboard, switch to other window (original one hour recorded voice).
Make one point selection
and use Paste-Mix (Menu > Edit > Paste-Mix).
11. After mixing you test
play, If the volume is high or low for one you can undo and adjust the
volume and mix again.
12. It is safer to save
the file using the "Save As" command giving the file a new name.
|