| How to open WMA files in FlexiMusic Wave Editor?
FlexiMusic Wave Editor cannot open WMA files
directly.
The easiest way to edit the audio in WMA files is to record in FlexiMusic Wave
Editor playing the WMA files.
Record WMA:
1. In FlexiMusic Wave Editor, Under the File menu, choose New.
2. A New Sound dialog box will open. Choose the format
as 44100Hz, 16 bits, Stereo.
3. Click the Record button (the red circle) on the tool
button.
3. In Recording window click "Playing Device and
Volume". This will open the Volume Control dialog box in that mute the
Microphone, Click Ok. (If you don't see the Microphone in the volume control
box under the Options menu, choose Properties. In that you can choose
the volume controls.)
4. In Recording window click "Recording Source and
Volume". This will open the Recording Control dialog box. Choose Mixer
or Stereo Mix using Select option.
5. In Windows Explorer double click the file to play
WMA. It will be played by Windows Media Player.
6. Quickly switch to FlexiMusic Wave Editor Recording Window, Click
the "Start" button to start recording.
7. When your recording is
completed, click the Stop button.
8. Click "Done" button to finish
recording that will insert in to the file at the position you previously
selected.
9. To save your recording, click
the File menu and choose Save command.
Export WMA:
To create WMA files the
Windows Media 8 Encoding Utility
Encoder must be installed. Use below link to download and install.
For downloading:
http://download.microsoft.com/download/winmediatech40/wm8eu/8/w982kme/en-us/wm8eutil_setup.exe
1. Open the wav or mp3 file you
have saved.
2. Under the File menu, Choose
Export to WMA.
3. This will open the Select WMA
Compressing Parameters dialog box. In that choose the supported bit-rate as you
need.
4. Click Ok to save the file as
WMA.
5. You've done! Now you can play
back the file in Windows Media Player or WinAmp.
Note: When you try to export to
WMA file for the first time FlexiMusic Wave Editor will ask for an encoder and
you just need to show that once. Remember that you need to run the downloaded
file wm8eutil_setup.exe to install it and then show the installed file
"WM8EUTIL.exe".
|
