|
|
|
| How to record from an
external audio player to pc?
To record in FlexiMusic Wave
Editor by playing the radio or cassette player connecting it to PC. |
| Connect the cassette
deck, amplified turntable output, radio, or other audio device to the
computer's Line In socket (usually blue) using a stereo audio cable. |
| Use the File > New
command to create a new file. For CD quality recording, use stereo, 16 bits and a
sampling rate of 44100Hz. Click Ok to create a New file. |
|
Click on the screen once to
select the position where you would insert the recorded wave sound. |
| Click the Record button
(the red circle) on the tool button. This will open the Record window. |
| Choose
Line-In, in the Recording Source drop down list.
Click on "Volume" button to open the "Recording Source Volume Control"
window, and then adjust the volume for Line-In. |
| If you find that the
recording volume is too low or too high, check to
see if your external player and adjust that volume. |
| Play the External Player
and Quickly click "Start" button in FlexiMusic Wave Editor Recording Window,
to start recording.
|
|
When you've finished
recording, press Stop (button). Click "Done" button to
finish recording that will insert in to the file at the position you
previously selected.
|
|
To save your recording, click
the File menu and choose Save command. |
|
