Home Products Downloads Order Support Contact Us About Us

     
 

 
 

FAQ - Categories:

 
 

 
 

Wave Editor FAQ:

 
 

General

 
 

Installing/Setup

 
 

Record Audio

 
 

Selecting Audio

 
 

Mixing Audio

 
 

Editing Audio

 
 

Mp3 & WMA Audio

 
 

Save a Song

 
 

CD Read & Write

 
 

 

 
 

Composer FAQ:

 
 

Music Making

 
 

 
 

 

 
 

 
 

Products:

 
 

FlexiMusic Wave Editor

 
 

FlexiMusic Composer

 
 

FlexiMusic Kids Composer

 
 

FlexiMusic Generator

 
 

FlexiMusic Orchestra

 
 

 
 

 
 

 
 

 
 

 

 

 

 

How to record my voice and mix with music?

Run the FlexiMusic Wave Editor,

Recording your Voice:

1. To make a voice wav click on File > New or click on the New button, Choose the format as 44100Hz, 16 bits, Stereo. Click Ok to create a New file.

2. Click on the screen once to select the position where you would insert the recorded wave sound.

3. Click the Record button (the red circle) on the tool button. This will open the Record window.

4. Before Recording your voice, Make sure that Microphone is selected. In the Recording Source drop down list,  Choose Microphone. Click on "Volume" button to open the "Recording Source Volume Control" window, and then adjust the volume for Microphone to the highest possible performance.

5. As soon as you wish to start recording click "Start" button in Record Audio window of FlexiMusic Wave Editor.

6. As you are recording, you'll see the levels of the volume going up an down on the vertical white  bar, of your voice being recorded.
 
7. You can pause the process of recording by clicking the "Pause" button any time you want and then resume it by clicking the "Continue" button.

8. When you've finished recording, press Stop (button).

9. Click "Done" button to insert the recording  into the file at the position you previously selected.

10. Once you have completed the recording, select the required portions only and use the Trim command (Edit > Trim) to deletes any unused audio.

11. Listen to the recording by pressing the Play button.

12. To save your recording, click the File menu and choose Save command.

Mixing:

13. Keeping the voice file opened, Open the music file. You can switch between files using the top tab.

14. Check the format for both files, make it same if they are different using the format menu, if you have originally recorded with the same format then no need to change the format.

15. Select the part that is recorded and use "Copy" command.

16. Switch to the music file. Using one point selection and use "Paste-Mix" command (Edit > Paste > Mix).

Matching voice with the Music:

In some cases you need to match the vocal exactly with music, by hearing the music while recording vocal. For detailed instruction on that please see this FAQ http://www.fleximusic.com/support/record14.htm

 

 
 
Back to Record
 
Back to FAQ Category
   
Privacy Policy           MP3 Editor Audio Editor