| How to record a
sound/audio that is already playing in my PC?
To record in FlexiMusic
Wave Editor, you need to create a new file, select the recording source,
adjust volumes then start recording.
Record Audio
1. Run the FlexiMusic Wave
Editor.
2. Use the File > New
command to create a new file. For quality recording, use stereo, 16 bits and
a sampling rate of 44100Hz. Click Ok to create a New file.
3.
Click on the screen once to
select the position where you would insert the recorded wave sound.
4.
Click the Record button (the red circle) on the tool button. This will open
the Record window.
5. Choose Stereo Mix
device or the equivalent, in the Recording Source drop
down list. Click on "Volume" button to open the "Recording
Source Volume Control" window, and then adjust the volume for Stereo Mix to
the highest possible performance.
6. In Recording window
click "Volume"
button, to open the "Recording Source Volume Control" window. In that Click on "Show
Others" button, it will open up the "Other Volume Controls" window in that mute the
Microphone and close.
7. Now
start the playback of the file in Windows Media Player or any other device that is
used to play on your system and click
the "Start" button in Record Audio window of FlexiMusic
Wave Editor. If necessary,
Adjust the volume
setting by seeing the levels of the volume going up an down on the vertical
white bar, of your voice being recorded.
8. You can
pause the process of recording by clicking the "Pause" button any
time you want and then resume it by clicking the "Continue" button.
9. When
you want to stop recording, just click "Stop" button, Click "Done"
button to finish recording and the destination sound file is there.
10. To save
your recording, click the File menu and choose Save command. Name
your file and save in .wav format and save it to an folder (as you like).
Play
Audio
11. Play
full recording using Play button. While playing starting and ending of your
recording file you will see some silence part
12. Now
remove silence at the beginning of recording by selecting the silence part
of an audio and using Delete (Menu > Edit > Delete) command.
Note: How to select, Please see
this FAQ
http://www.fleximusic.com/support/select01.htm
13.
Similarly remove silence at the ending of recording by selecting the silence
part of an audio.
14. Now
play the song for review the changes.
15. Save
the file once again.
|
