How to select audio from time
"1 minutes to 2 1/2 minutes", or select "1 minutes 30 seconds" duration
starting at the time 1 minute?
In FlexiMusic Wave Editor you
can select the required region accurately by entering the values of
Start/End position using the command Enter Start/End Positions.
1. Run the FlexiMusic Wave
Editor. Open a audio file to process.
2. Choose "Enter Start/End
Positions" from the Select menu (Menu > Select > Enter Start/End
Positions). This will open the Enter Start/End Positions dialog box.
3. In that, enter the
durations of the song you need to select. First enter the values for Start
Position (For example, you need to select the durations of time starts from
1 minutes to 2 1/2 minutes) as 00:01:00 and similarly the values for
End Position as 00:02:30 and then click OK.
Note: you have to enter the values in hours:minutes:seconds format or
only in seconds.
4. Now the entered duration
will be selected accurately.
Remark: Alternatively
you can also enter the Start Time, End Time and Duration individually by
clicking on the Selection display at lower right hand side.
|
